The Manfrotto Superclamp is one of most useful pieces of equipment any cameraman can have. It will clamp onto round poles up to 50mm dia. and flat surfaces up to 35mm thick. Into this fits a range of spigots and brackets to hold lights, ext. arms, mono balls, Supplied without spigot
Will grip very hard to take max. weight 15Kg

MA 035 - Superclamp £ 17.00

Bulk price 5 for £ 75.00

Standard Super clamp spigot.
Hex snap in fitting at one end, 16mm lighting spigot and 3/8” thread at other.

MA 036 - 38 - Spigot £ 4.50

Standard Super clamp spigot as above but with 1/4” thread at other end, to suit some smaller lights and TFT monitors

MA 036 - 14 - Spigot £ 4.50

Manfrotto double ended Superclamp spigot with 2 x standard 16mm lighting stud, 3/8” thread at one end 1/4” thread at other. Allows two Superclamps to be joined together at adjustable angles.

MA 013 - Spigot  £ 6.50

Superclamp extension arm 6” long (150mm) with spigot. Enables two lights to be held on one stand or hold a microphone onto a light stand. A handy extra

 Ext. Arm  £ 9.00

See end of list for Knob controlled Magic arm for Cameras

Manfrotto Magic arm. Articulated arm with centre lever to lock all 3 movements. Each end will fit into a Super clamp. 16mm studs at both ends on ball and socket joints. Made to hold lights at odd angles. Each end also has female threads, one end 1/4”, other 3/8”

MA 143 - Magic Arm - £ 72.00

Camera bracket to fit magic arm or Variable friction arm. Enables small camera to mount onto Magic arm, comes with 1/4” camera screw

MA143/BKT - Bracket - £ 9.00

Wall plate 90mm x 150mm with 16mm standard lighting spigot 75mm high. Can be screwed to ceiling or wall to hold background light. Steel construction

WP1 - Wall plate - £ 15.00

Wall plate simlar to WP1 but with 16mm female socket. Will support lights or Manfrotto Magic arm, Tilt-top or ARRI 196 arm. 100mm square, black finish, steel construction

WP2 - Wall plate - £ 15.00

Rapid adapter, 16mm female to 3/8” thread. To attach some video lights or microphones to lighting stands

MA 014-38 - £ 8.50

Rapid adapter, 16mm female to 1/4” thread. To attach some small video lights or TFT monitors to lighting stands or magic arms

MA 014-14 - £ 8.50

Manfrotto Tilt-Top. Handy small size joint that will hold a small MiniDV camera onto a Superclamp. 16mm studs at both ends, twin ball joint in the middle. Strong metal construction. Will also fit into wall plate 2

MA 155 - Tilt-Top - £ 34.00

Croc - clip for holding gels onto barn door flaps. 7cm long

CROC -CLIP   £ 5.00 for 10

Safety cable, black steel cable, 53cms long with 6 cm clip. Max load 15 Kgs. To be used when lamps are held on a bar over 3 metres high.

Safety bond £ 4.00

Variable Friction Arm

Like a Magic arm but with a large knob to control and lock the centre locking and the two end ball and socket movements.
This is better when a camera is mounted on the arm as small and fine adjustments can be made. Each end has a 16mm spigot to fit a Superclamp, Wallplate WP2 or Camera bracket 143BKT.
One end has 3/8” female thread, other end has 1/4” female thread.
A most useful arm to hold up small DV cameras on odd places

MN244N
Variable Friction arm
£ 80.00